View previous topic :: View next topic |
Author |
Message |
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Thu Jun 09, 2005 12:45 am Post subject: LET engine and general tidy up operation.... |
|
|
Agents: Jason & Jacko
Mission: Impossible and too far.
Well, as some of you may know I have bought a Cally and I have decided to kill it for it's 'Engine of plenty'
First things first engine and box out of Cally.
I stripped all the bits of the LET to bling it, on way to pod the XE blew a core plug so my hand was forced. LET needed to be put in quicker (so at least this time I'll be blowing an expensive engine )
I didn't make any note of where all the bits went on the engine, as usual I am spot on and very organised
Enter Agent Jacko....
Start to put engine back together. Needed more fire power.
So drafted special agent Dene..
Who also brought in a very special agent Mossop...
The team was complete, all the bits were identified. Game on.
Ok back to the Mk1. XE is now out and Jacko's laying low at mine until daybreak, where we are going to attack the cars once more.
I'll stick the pics up and [bigbrothervoice]Let you decide[/bigbrothervoice]
Last edited by Jason on Sun Jun 12, 2005 9:05 am; edited 1 time in total |
|
Back to top |
|
|
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Thu Jun 09, 2005 1:18 am Post subject: |
|
|
Here we go....
Enjoy...
To be continued
Last edited by Jason on Thu Jun 09, 2005 1:24 am; edited 1 time in total |
|
Back to top |
|
|
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Thu Jun 09, 2005 1:24 am Post subject: |
|
|
Tomorrows' mission:
Seam weld and paint engine bay.
Swap Clutch and flywheel from XE to LET
Temp fit F16CR to box to LET and blow it up.
Refit F20 to LET and blow it up.
Scratch head and try to fit F28
Run LET on standard brakes to see how many VTEC's we can hit.
Buy Bearings for 5 stud conversion, clean turbo calipers.
Drink coffee. Drink coffee. |
|
Back to top |
|
|
Suicide Astra Legend
Joined: 30 May 2005 Posts: 4790
|
Posted: Thu Jun 09, 2005 2:58 am Post subject: |
|
|
Sounds like alot of fun mate |
|
Back to top |
|
|
Nrj Astra Expert
Joined: 29 May 2005 Posts: 1854
Location: Waterlooville, Hampshire.
|
Posted: Thu Jun 09, 2005 6:22 am Post subject: |
|
|
what engine mounts you using?
you seriously going to waste you time fitting the F16 _________________ WANTED - Big Block Legs, GTE Engine Mounts |
|
Back to top |
|
|
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Thu Jun 09, 2005 8:34 am Post subject: |
|
|
NO |
|
Back to top |
|
|
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Thu Jun 09, 2005 12:28 pm Post subject: |
|
|
Engine bay tidy up and seam and stitch welding have commenced.
Jacko has been attacking the XE for the Clutch plate and is now into the LET.
|
|
Back to top |
|
|
Delmastiff Astra Messiah
Joined: 29 Apr 2005 Posts: 6441
Location: Herts / Essex Border
|
Posted: Thu Jun 09, 2005 2:12 pm Post subject: |
|
|
Go on boys, get in there!!
As Steve said, it does sound like alot of fun. I'm with you in spirit mate _________________
|
|
Back to top |
|
|
Mark1GTE wee mark
Joined: 28 May 2005 Posts: 4402
Location: Scotland
|
Posted: Thu Jun 09, 2005 4:56 pm Post subject: |
|
|
Delmastiff wrote: | Go on boys, get in there!!
As Steve said, it does sound like alot of fun. I'm with you in spirit mate |
get in where is this secret code for a threesome |
|
Back to top |
|
|
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Thu Jun 09, 2005 6:52 pm Post subject: |
|
|
Bassman.....HELP!!!
I'm no good with wires.
Arrgggh!
Apart from that everything is going well
Gotta go, I've left Jacko outside with power tools. |
|
Back to top |
|
|
GT/Estate Astra Expert
Joined: 30 May 2005 Posts: 2230
Location: Rotherham
|
Posted: Thu Jun 09, 2005 7:46 pm Post subject: |
|
|
LET wiring isn't in my books, plus i'm still waiting for my tyres
i may be able to sort some thing out mate over the weekend _________________ 1983 5dr project 1.4Ti in china blue
1983 SR in mat black rat on the road again
1980 5dr Opel estate (9 year ongoing project) |
|
Back to top |
|
|
Jason Rallyslag
Joined: 29 May 2005 Posts: 5552
Location: Halifax on't couch or in't pub
|
Posted: Fri Jun 10, 2005 2:37 am Post subject: |
|
|
Ah the tyres....
Mmmm, well it might be a bit awkward now, I have left work. I can still go down at night so I'll see what comes in.
Jacko seems to know what he's doing for the time being, if he drifts off course I'll be on the blower to you matey...!!! |
|
Back to top |
|
|
Jacko Astra Expert
Joined: 28 May 2005 Posts: 1757
Location: Leicester via Manchester
|
Posted: Fri Jun 10, 2005 3:34 pm Post subject: |
|
|
WERE IN, well we have been in since last night, just neither of us could be bothered to move fingers anymore.
Everything is in, on and in the correct-ish place, so all we need t do now is some wiring, i've started on it, i've soldered part of the LET loom in, done the rad plug, fan and all that, all cally parts are being used so if anything goes its an easy in-out deal! TBH, its looking factory fit, really neat, just wish it was my own car again!! lol
anyway, just a few more wires to go and we should be ready for testing, so i could do with some help and advice ASAP please, so give me ring as im not going to be sat at the computer, my number is 07916 329 357, nice one, well the wires we need sorting are below;
on the car loom we have;
red
black
2x green into one
blue/yellow
these were attached to XE loom
ON the LET loom we have;
Brown
Brow/Green
Black
Back/Yellow
-> Im 90% sure these don't do anything, but thought i would ask
Black/White
Can anyone help??
Regards
Jacko _________________ Nurburgring - Not for girls |
|
Back to top |
|
|
Jacko Astra Expert
Joined: 28 May 2005 Posts: 1757
Location: Leicester via Manchester
|
Posted: Fri Jun 10, 2005 3:35 pm Post subject: |
|
|
Jacko wrote: | WERE IN, well we have been in since last night, just neither of us could be bothered to move fingers anymore.
Everything is in, on and in the correct-ish place, so all we need t do now is some wiring, i've started on it, i've soldered part of the LET loom in, done the rad plug, fan and all that, all cally parts are being used so if anything goes its an easy in-out deal! TBH, its looking factory fit, really neat, just wish it was my own car..................... again!! lol
anyway, just a few more wires to go and we should be ready for testing, so i could do with some help and advice ASAP please, so give me ring as im not going to be sat at the computer, my number is 07916 329 357, nice one, well the wires we need sorting are below;
on the car loom we have;
red
black
2x green into one
blue/yellow
these were attached to XE loom
ON the LET loom we have;
Brown
Brow/Green
Black
Back/Yellow
-> Im 90% sure these don't do anything, but thought i would ask
Black/White
Can anyone help??
Regards
Jacko |
_________________ Nurburgring - Not for girls |
|
Back to top |
|
|
glenn Club Manager
Joined: 17 Mar 2005 Posts: 2095
Location: Chelmsford
|
Posted: Fri Jun 10, 2005 4:21 pm Post subject: |
|
|
Get down the library and photocopy the Autodata manual _________________ 4x4 Turbo MK1 Astra - may actually be finished this year!
Band Hire UK |
|
Back to top |
|
|
|